Fabrics & Finishes

# MATCH/FR

# ZANA/FR

ALCANTARA - A

ASTRID

CHARTRES

DIOS

DIVINA MD/FR

DIVINA MELANGE/FR

FILE

GALICE/FR

HARMONY

JOY/FR

KERALA

LUISA

MAPLE/FR

MAXI/FR

MORPH

NOMA

STEELCUT TRIO 3/FR

VIDAR/FR

VILO

Back

# MATCH/FR

COTTON 50%

VISCOSE 33%

LINEN 17%

COTTON 50%

VISCOSE 33%

LINEN 17%

Back

# ZANA/FR

COTTON 70%

VISCOSE 30%

ZANA - A cotton/viscose chenille offering both softness and a pleasant feel.... VOIR PLUS ZANA - A cotton/viscose chenille offering both softness and a pleasant feel. As with all chenilles, a moiré effect may develop: as with velvets, this is caused by flattening of the fibres.

COTTON 70%

VISCOSE 30%

Back

ALCANTARA - A

POLYESTER 68%

NON FIBROUS POLYURETHANE 32%

ALCANTARA - The benchmark high-end microfibre brand, easy to clean and... VOIR PLUS ALCANTARA - The benchmark high-end microfibre brand, easy to clean and extremely hard-wearing. A soft feel with an incomparable velvety effect.

POLYESTER 68%

NON FIBROUS POLYURETHANE 32%

Back

ASTRID

VISCOSE 57%

LINEN 24%

COTTON 19%

VISCOSE 57%

LINEN 24%

COTTON 19%

Back

CHARTRES

ACRYLIC 100%

CHARTRES - A 100 % acrylic fabric : water-resistant, easy-care. 100 % outdoor.

ACRYLIC 100%

Back

DIOS

COTTON 40%

POLYESTER 25%

ACRYLIC 15%

VISCOSE 10%

WOOL 10%

COTTON 40%

POLYESTER 25%

ACRYLIC 15%

VISCOSE 10%

WOOL 10%

Back

DIVINA MD/FR

WOOL 100%

WOOL 100%

Back

DIVINA MELANGE/FR

WOOL 100%

WOOL 100%

Back

FILE

POLYESTER (TREVIRA CS) 100%

POLYESTER (TREVIRA CS) 100%

Back

GALICE/FR

POLYESTER (TREVIRA CS) 100%

POLYESTER (TREVIRA CS) 100%

Back

HARMONY

WOOL 85%

POLYAMID 15%

WOOL 85%

POLYAMID 15%

Back

JOY/FR

ACRYLIC 48%

WOOL 24%

POLYESTER 12%

POLYAMID 10%

ACRYLIC 48%

WOOL 24%

POLYESTER 12%

POLYAMID 10%

Back

KERALA

COTTON 50%

VISCOSE 35%

LINEN 15%

COTTON 50%

VISCOSE 35%

LINEN 15%

Back

LUISA

ACRYLIC 35%

VISCOSE 30%

POLYESTER 15%

COTTON 10%

LINEN 10%

ACRYLIC 35%

VISCOSE 30%

POLYESTER 15%

COTTON 10%

LINEN 10%

Back

MAPLE/FR

VISCOSE 81%

LINEN 15%

POLYESTER 4%

VISCOSE 81%

LINEN 15%

POLYESTER 4%

Back

MAXI/FR

POLYESTER 54%

WOOL 32%

POLYAMID 13%

ELASTHANE 1%

MAXI - A polyester/wool weave offering a good degree of stretch, ideal for... VOIR PLUS MAXI - A polyester/wool weave offering a good degree of stretch, ideal for covering settees with the very roundest of lines. Very good resistance to wear; easy to maintain.

POLYESTER 54%

WOOL 32%

POLYAMID 13%

ELASTHANE 1%

Back

MORPH

WOOL 85%

POLYAMID 15%

WOOL 85%

POLYAMID 15%

Back

NOMA

RECYCLED POLYESTER 100%

RECYCLED POLYESTER 100%

Back

STEELCUT TRIO 3/FR

WOOL 90%

POLYAMID 10%

WOOL 90%

POLYAMID 10%

Back

VIDAR/FR

WOOL 94%

NYLON 6%

VIDAR - A coarse, yarn-dyed fabric in 100% wool, with an unusual colour... VOIR PLUS VIDAR - A coarse, yarn-dyed fabric in 100% wool, with an unusual colour palette and a pleasant feel. Easy care and very good resistance to wear.

WOOL 94%

NYLON 6%

Back

VILO

VISCOSE 55%

COTTON 25%

LINEN 10%

POLYESTER 7%

ACRYLIC 3%

VISCOSE 55%

COTTON 25%

LINEN 10%

POLYESTER 7%

ACRYLIC 3%

Description

Multy offers an intermediate position half-way between settee and bed: a chaise longue with ample leg support.

Design by

Claude Brisson

Claude Brisson Ligne Roset
MULTY
BEDSETTEE 120 WITHOUT ARMS WITH LUMBAR CUSHIONS
DIMENSIONS
  • H 820 mm x W 1310 mm x D 1030 mm x SH 440 mm
Weight
  • Including packaging
    55 kg

Download product information sheet

Technical Specifications

Frame in multi-ply and panels of particleboard, with steel mechanism and birch slats. Seat in polyether foam (28kg/m³ - 3.0kPa). As an option it is possible to have a 9 cm thick Bultex mattress, density 38 kg/m3 (see references SUPPLEMENT FOR BULTEX MATTRESS 10600216 and 10600211). Back in polyether foam (28kg/m³ - 3.0kPa). Lumbar cushions are supplied as follows: 2 x W60 for small bed-settee without arms, and 2 x W78 for large bed-settee without arms; 1 x W78 for small bed-settee with arms, and 2 x W60 for large bed-settee with arms. Please take these details into consideration when ordering additional/subsequent lumbars. The armrests (polyether foam 28 kg/m³ - 3.0 kPa + polyester quilting 200 g/m²) or bedside tables (MDF top diameter 43 cm - thickness 2 cm) pivot to allow the bed-settee to open.
MULTY is easy to operate, and offers excellent comfort both as a bed (with polyether mattress size : 153x194x8, 119x194x8) and as a settee. When unfolded, its depth is 200 cm for the bed-settee W 155. Mattress has an ecru-coloured cover in 50% polyester/50% cotton (dry cleanable), which has been treated with ''HealthGuard'' (antibacterial & fungicidal). A foam sheet is supplied to place between the slats and the seat when folded. For instructions on use, please see the card which comes with the bed. MULTY has been specially designed for use as a bed on an everyday basis. Optional extras: lumbar cushions and arms. Covers of lumbar cushions and armrests are removable.

MULTY
BEDSETTEE 120 WITHOUT ARMS WITHOUT LUMBAR CUSHIONS
DIMENSIONS
  • H 820 mm x W 1310 mm x D 1030 mm x SH 440 mm
Weight
  • Including packaging
    55 kg

Download product information sheet

Technical Specifications

Frame in multi-ply and panels of particleboard, with steel mechanism and birch slats. Seat in polyether foam (28kg/m³ - 3.0kPa). As an option it is possible to have a 9 cm thick Bultex mattress, density 38 kg/m3 (see references SUPPLEMENT FOR BULTEX MATTRESS 10600216 and 10600211). Back in polyether foam (28kg/m³ - 3.0kPa). Lumbar cushions are supplied as follows: 2 x W60 for small bed-settee without arms, and 2 x W78 for large bed-settee without arms; 1 x W78 for small bed-settee with arms, and 2 x W60 for large bed-settee with arms. Please take these details into consideration when ordering additional/subsequent lumbars. The armrests (polyether foam 28 kg/m³ - 3.0 kPa + polyester quilting 200 g/m²) or bedside tables (MDF top diameter 43 cm - thickness 2 cm) pivot to allow the bed-settee to open.
MULTY is easy to operate, and offers excellent comfort both as a bed (with polyether mattress size : 153x194x8, 119x194x8) and as a settee. When unfolded, its depth is 200 cm for the bed-settee W 155. Mattress has an ecru-coloured cover in 50% polyester/50% cotton (dry cleanable), which has been treated with ''HealthGuard'' (antibacterial & fungicidal). A foam sheet is supplied to place between the slats and the seat when folded. For instructions on use, please see the card which comes with the bed. MULTY has been specially designed for use as a bed on an everyday basis. Optional extras: lumbar cushions and arms. Covers of lumbar cushions and armrests are removable.

MULTY
BEDSETTEE 155 WITHOUT ARMS WITH LUMBAR CUSHIONS
DIMENSIONS
  • H 820 mm x W 1660 mm x D 1030 mm x SH 440 mm
Weight
  • Including packaging
    61 kg

Download product information sheet

Technical Specifications

Frame in multi-ply and panels of particleboard, with steel mechanism and birch slats. Seat in polyether foam (28kg/m³ - 3.0kPa). As an option it is possible to have a 9 cm thick Bultex mattress, density 38 kg/m3 (see references SUPPLEMENT FOR BULTEX MATTRESS 10600216 and 10600211). Back in polyether foam (28kg/m³ - 3.0kPa). Lumbar cushions are supplied as follows: 2 x W60 for small bed-settee without arms, and 2 x W78 for large bed-settee without arms; 1 x W78 for small bed-settee with arms, and 2 x W60 for large bed-settee with arms. Please take these details into consideration when ordering additional/subsequent lumbars. The armrests (polyether foam 28 kg/m³ - 3.0 kPa + polyester quilting 200 g/m²) or bedside tables (MDF top diameter 43 cm - thickness 2 cm) pivot to allow the bed-settee to open.
MULTY is easy to operate, and offers excellent comfort both as a bed (with polyether mattress size : 153x194x8, 119x194x8) and as a settee. When unfolded, its depth is 200 cm for the bed-settee W 155. Mattress has an ecru-coloured cover in 50% polyester/50% cotton (dry cleanable), which has been treated with ''HealthGuard'' (antibacterial & fungicidal). A foam sheet is supplied to place between the slats and the seat when folded. For instructions on use, please see the card which comes with the bed. MULTY has been specially designed for use as a bed on an everyday basis. Optional extras: lumbar cushions and arms. Covers of lumbar cushions and armrests are removable.

MULTY
BEDSETTEE 155 WITHOUT ARMS WITHOUT LUMBAR CUSHIONS
DIMENSIONS
  • H 820 mm x W 1660 mm x D 1030 mm x SH 440 mm
Weight
  • Including packaging
    61 kg

Download product information sheet

Technical Specifications

Frame in multi-ply and panels of particleboard, with steel mechanism and birch slats. Seat in polyether foam (28kg/m³ - 3.0kPa). As an option it is possible to have a 9 cm thick Bultex mattress, density 38 kg/m3 (see references SUPPLEMENT FOR BULTEX MATTRESS 10600216 and 10600211). Back in polyether foam (28kg/m³ - 3.0kPa). Lumbar cushions are supplied as follows: 2 x W60 for small bed-settee without arms, and 2 x W78 for large bed-settee without arms; 1 x W78 for small bed-settee with arms, and 2 x W60 for large bed-settee with arms. Please take these details into consideration when ordering additional/subsequent lumbars. The armrests (polyether foam 28 kg/m³ - 3.0 kPa + polyester quilting 200 g/m²) or bedside tables (MDF top diameter 43 cm - thickness 2 cm) pivot to allow the bed-settee to open.
MULTY is easy to operate, and offers excellent comfort both as a bed (with polyether mattress size : 153x194x8, 119x194x8) and as a settee. When unfolded, its depth is 200 cm for the bed-settee W 155. Mattress has an ecru-coloured cover in 50% polyester/50% cotton (dry cleanable), which has been treated with ''HealthGuard'' (antibacterial & fungicidal). A foam sheet is supplied to place between the slats and the seat when folded. For instructions on use, please see the card which comes with the bed. MULTY has been specially designed for use as a bed on an everyday basis. Optional extras: lumbar cushions and arms. Covers of lumbar cushions and armrests are removable.

MULTY
BEDSETTEE 120 WITH ARMS WITH LUMBAR CUSHIONS
DIMENSIONS
  • H 820 mm x W 1530 mm x D 1030 mm x SH 440 mm
Weight
  • Including packaging
    67 kg

Download product information sheet

Technical Specifications

Frame in multi-ply and panels of particleboard, with steel mechanism and birch slats. Seat in polyether foam (28kg/m³ - 3.0kPa). As an option it is possible to have a 9 cm thick Bultex mattress, density 38 kg/m3 (see references SUPPLEMENT FOR BULTEX MATTRESS 10600216 and 10600211). Back in polyether foam (28kg/m³ - 3.0kPa). Lumbar cushions are supplied as follows: 2 x W60 for small bed-settee without arms, and 2 x W78 for large bed-settee without arms; 1 x W78 for small bed-settee with arms, and 2 x W60 for large bed-settee with arms. Please take these details into consideration when ordering additional/subsequent lumbars. The armrests (polyether foam 28 kg/m³ - 3.0 kPa + polyester quilting 200 g/m²) or bedside tables (MDF top diameter 43 cm - thickness 2 cm) pivot to allow the bed-settee to open.
MULTY is easy to operate, and offers excellent comfort both as a bed (with polyether mattress size : 153x194x8, 119x194x8) and as a settee. When unfolded, its depth is 200 cm for the bed-settee W 155. Mattress has an ecru-coloured cover in 50% polyester/50% cotton (dry cleanable), which has been treated with ''HealthGuard'' (antibacterial & fungicidal). A foam sheet is supplied to place between the slats and the seat when folded. For instructions on use, please see the card which comes with the bed. MULTY has been specially designed for use as a bed on an everyday basis. Optional extras: lumbar cushions and arms. Covers of lumbar cushions and armrests are removable.

MULTY
BEDSETTEE 120 WITH ARMS WITHOUT LUMBAR CUSHIONS
DIMENSIONS
  • H 820 mm x W 1530 mm x D 1030 mm x SH 440 mm
Weight
  • Including packaging
    67 kg

Download product information sheet

Technical Specifications

Frame in multi-ply and panels of particleboard, with steel mechanism and birch slats. Seat in polyether foam (28kg/m³ - 3.0kPa). As an option it is possible to have a 9 cm thick Bultex mattress, density 38 kg/m3 (see references SUPPLEMENT FOR BULTEX MATTRESS 10600216 and 10600211). Back in polyether foam (28kg/m³ - 3.0kPa). Lumbar cushions are supplied as follows: 2 x W60 for small bed-settee without arms, and 2 x W78 for large bed-settee without arms; 1 x W78 for small bed-settee with arms, and 2 x W60 for large bed-settee with arms. Please take these details into consideration when ordering additional/subsequent lumbars. The armrests (polyether foam 28 kg/m³ - 3.0 kPa + polyester quilting 200 g/m²) or bedside tables (MDF top diameter 43 cm - thickness 2 cm) pivot to allow the bed-settee to open.
MULTY is easy to operate, and offers excellent comfort both as a bed (with polyether mattress size : 153x194x8, 119x194x8) and as a settee. When unfolded, its depth is 200 cm for the bed-settee W 155. Mattress has an ecru-coloured cover in 50% polyester/50% cotton (dry cleanable), which has been treated with ''HealthGuard'' (antibacterial & fungicidal). A foam sheet is supplied to place between the slats and the seat when folded. For instructions on use, please see the card which comes with the bed. MULTY has been specially designed for use as a bed on an everyday basis. Optional extras: lumbar cushions and arms. Covers of lumbar cushions and armrests are removable.

MULTY
BEDSETTEE 155 WITH ARMS WITH LUMBAR CUSHIONS
DIMENSIONS
  • H 820 mm x W 1880 mm x D 1030 mm x SH 440 mm
Weight
  • Including packaging
    73 kg

Download product information sheet

Technical Specifications

Frame in multi-ply and panels of particleboard, with steel mechanism and birch slats. Seat in polyether foam (28kg/m³ - 3.0kPa). As an option it is possible to have a 9 cm thick Bultex mattress, density 38 kg/m3 (see references SUPPLEMENT FOR BULTEX MATTRESS 10600216 and 10600211). Back in polyether foam (28kg/m³ - 3.0kPa). Lumbar cushions are supplied as follows: 2 x W60 for small bed-settee without arms, and 2 x W78 for large bed-settee without arms; 1 x W78 for small bed-settee with arms, and 2 x W60 for large bed-settee with arms. Please take these details into consideration when ordering additional/subsequent lumbars. The armrests (polyether foam 28 kg/m³ - 3.0 kPa + polyester quilting 200 g/m²) or bedside tables (MDF top diameter 43 cm - thickness 2 cm) pivot to allow the bed-settee to open.
MULTY is easy to operate, and offers excellent comfort both as a bed (with polyether mattress size : 153x194x8, 119x194x8) and as a settee. When unfolded, its depth is 200 cm for the bed-settee W 155. Mattress has an ecru-coloured cover in 50% polyester/50% cotton (dry cleanable), which has been treated with ''HealthGuard'' (antibacterial & fungicidal). A foam sheet is supplied to place between the slats and the seat when folded. For instructions on use, please see the card which comes with the bed. MULTY has been specially designed for use as a bed on an everyday basis. Optional extras: lumbar cushions and arms. Covers of lumbar cushions and armrests are removable.

MULTY
BEDSETTEE 155 WITH ARMS WITHOUT LUMBAR CUSHIONS
DIMENSIONS
  • H 820 mm x W 1880 mm x D 1030 mm x SH 440 mm
Weight
  • Including packaging
    73 kg

Download product information sheet

Technical Specifications

Frame in multi-ply and panels of particleboard, with steel mechanism and birch slats. Seat in polyether foam (28kg/m³ - 3.0kPa). As an option it is possible to have a 9 cm thick Bultex mattress, density 38 kg/m3 (see references SUPPLEMENT FOR BULTEX MATTRESS 10600216 and 10600211). Back in polyether foam (28kg/m³ - 3.0kPa). Lumbar cushions are supplied as follows: 2 x W60 for small bed-settee without arms, and 2 x W78 for large bed-settee without arms; 1 x W78 for small bed-settee with arms, and 2 x W60 for large bed-settee with arms. Please take these details into consideration when ordering additional/subsequent lumbars. The armrests (polyether foam 28 kg/m³ - 3.0 kPa + polyester quilting 200 g/m²) or bedside tables (MDF top diameter 43 cm - thickness 2 cm) pivot to allow the bed-settee to open.
MULTY is easy to operate, and offers excellent comfort both as a bed (with polyether mattress size : 153x194x8, 119x194x8) and as a settee. When unfolded, its depth is 200 cm for the bed-settee W 155. Mattress has an ecru-coloured cover in 50% polyester/50% cotton (dry cleanable), which has been treated with ''HealthGuard'' (antibacterial & fungicidal). A foam sheet is supplied to place between the slats and the seat when folded. For instructions on use, please see the card which comes with the bed. MULTY has been specially designed for use as a bed on an everyday basis. Optional extras: lumbar cushions and arms. Covers of lumbar cushions and armrests are removable.

MULTY
LUMBAR CUSHION BEDSETTEE 120 WITHOUT ARMS
DIMENSIONS
  • x W 600 mm x D 330 mm
Weight
  • Including packaging
    1 kg

Download product information sheet

Technical Specifications

Frame in multi-ply and panels of particleboard, with steel mechanism and birch slats. Seat in polyether foam (28kg/m³ - 3.0kPa). As an option it is possible to have a 9 cm thick Bultex mattress, density 38 kg/m3 (see references SUPPLEMENT FOR BULTEX MATTRESS 10600216 and 10600211). Back in polyether foam (28kg/m³ - 3.0kPa). Lumbar cushions are supplied as follows: 2 x W60 for small bed-settee without arms, and 2 x W78 for large bed-settee without arms; 1 x W78 for small bed-settee with arms, and 2 x W60 for large bed-settee with arms. Please take these details into consideration when ordering additional/subsequent lumbars. The armrests (polyether foam 28 kg/m³ - 3.0 kPa + polyester quilting 200 g/m²) or bedside tables (MDF top diameter 43 cm - thickness 2 cm) pivot to allow the bed-settee to open.
MULTY is easy to operate, and offers excellent comfort both as a bed (with polyether mattress size : 153x194x8, 119x194x8) and as a settee. When unfolded, its depth is 200 cm for the bed-settee W 155. Mattress has an ecru-coloured cover in 50% polyester/50% cotton (dry cleanable), which has been treated with ''HealthGuard'' (antibacterial & fungicidal). A foam sheet is supplied to place between the slats and the seat when folded. For instructions on use, please see the card which comes with the bed. MULTY has been specially designed for use as a bed on an everyday basis. Optional extras: lumbar cushions and arms. Covers of lumbar cushions and armrests are removable.

MULTY
LUMBAR CUSHION BEDSETTEE 155 WITHOUT ARMS
DIMENSIONS
  • x W 780 mm x D 330 mm
Weight
  • Including packaging
    1 kg

Download product information sheet

Technical Specifications

Frame in multi-ply and panels of particleboard, with steel mechanism and birch slats. Seat in polyether foam (28kg/m³ - 3.0kPa). As an option it is possible to have a 9 cm thick Bultex mattress, density 38 kg/m3 (see references SUPPLEMENT FOR BULTEX MATTRESS 10600216 and 10600211). Back in polyether foam (28kg/m³ - 3.0kPa). Lumbar cushions are supplied as follows: 2 x W60 for small bed-settee without arms, and 2 x W78 for large bed-settee without arms; 1 x W78 for small bed-settee with arms, and 2 x W60 for large bed-settee with arms. Please take these details into consideration when ordering additional/subsequent lumbars. The armrests (polyether foam 28 kg/m³ - 3.0 kPa + polyester quilting 200 g/m²) or bedside tables (MDF top diameter 43 cm - thickness 2 cm) pivot to allow the bed-settee to open.
MULTY is easy to operate, and offers excellent comfort both as a bed (with polyether mattress size : 153x194x8, 119x194x8) and as a settee. When unfolded, its depth is 200 cm for the bed-settee W 155. Mattress has an ecru-coloured cover in 50% polyester/50% cotton (dry cleanable), which has been treated with ''HealthGuard'' (antibacterial & fungicidal). A foam sheet is supplied to place between the slats and the seat when folded. For instructions on use, please see the card which comes with the bed. MULTY has been specially designed for use as a bed on an everyday basis. Optional extras: lumbar cushions and arms. Covers of lumbar cushions and armrests are removable.

MULTY
ADJUSTABLE ARM
DIMENSIONS
Weight
  • Including packaging
    6 kg

Download product information sheet

Technical Specifications

Frame in multi-ply and panels of particleboard, with steel mechanism and birch slats. Seat in polyether foam (28kg/m³ - 3.0kPa). As an option it is possible to have a 9 cm thick Bultex mattress, density 38 kg/m3 (see references SUPPLEMENT FOR BULTEX MATTRESS 10600216 and 10600211). Back in polyether foam (28kg/m³ - 3.0kPa). Lumbar cushions are supplied as follows: 2 x W60 for small bed-settee without arms, and 2 x W78 for large bed-settee without arms; 1 x W78 for small bed-settee with arms, and 2 x W60 for large bed-settee with arms. Please take these details into consideration when ordering additional/subsequent lumbars. The armrests (polyether foam 28 kg/m³ - 3.0 kPa + polyester quilting 200 g/m²) or bedside tables (MDF top diameter 43 cm - thickness 2 cm) pivot to allow the bed-settee to open.
MULTY is easy to operate, and offers excellent comfort both as a bed (with polyether mattress size : 153x194x8, 119x194x8) and as a settee. When unfolded, its depth is 200 cm for the bed-settee W 155. Mattress has an ecru-coloured cover in 50% polyester/50% cotton (dry cleanable), which has been treated with ''HealthGuard'' (antibacterial & fungicidal). A foam sheet is supplied to place between the slats and the seat when folded. For instructions on use, please see the card which comes with the bed. MULTY has been specially designed for use as a bed on an everyday basis. Optional extras: lumbar cushions and arms. Covers of lumbar cushions and armrests are removable.

MULTY
BEDSIDE TABLE TOP SURFACE LACQUERED WHITE
DIMENSIONS
  • x Ø 430 mm
Weight
  • Including packaging
    7 kg

Download product information sheet

Technical Specifications

Frame in multi-ply and panels of particleboard, with steel mechanism and birch slats. Seat in polyether foam (28kg/m³ - 3.0kPa). As an option it is possible to have a 9 cm thick Bultex mattress, density 38 kg/m3 (see references SUPPLEMENT FOR BULTEX MATTRESS 10600216 and 10600211). Back in polyether foam (28kg/m³ - 3.0kPa). Lumbar cushions are supplied as follows: 2 x W60 for small bed-settee without arms, and 2 x W78 for large bed-settee without arms; 1 x W78 for small bed-settee with arms, and 2 x W60 for large bed-settee with arms. Please take these details into consideration when ordering additional/subsequent lumbars. The armrests (polyether foam 28 kg/m³ - 3.0 kPa + polyester quilting 200 g/m²) or bedside tables (MDF top diameter 43 cm - thickness 2 cm) pivot to allow the bed-settee to open.
MULTY is easy to operate, and offers excellent comfort both as a bed (with polyether mattress size : 153x194x8, 119x194x8) and as a settee. When unfolded, its depth is 200 cm for the bed-settee W 155. Mattress has an ecru-coloured cover in 50% polyester/50% cotton (dry cleanable), which has been treated with ''HealthGuard'' (antibacterial & fungicidal). A foam sheet is supplied to place between the slats and the seat when folded. For instructions on use, please see the card which comes with the bed. MULTY has been specially designed for use as a bed on an everyday basis. Optional extras: lumbar cushions and arms. Covers of lumbar cushions and armrests are removable.

MULTY
BEDSIDE TABLE ARGILE LACQUERED TOP
DIMENSIONS
  • x Ø 430 mm
Weight
  • Including packaging
    7 kg

Download product information sheet

Technical Specifications

Frame in multi-ply and panels of particleboard, with steel mechanism and birch slats. Seat in polyether foam (28kg/m³ - 3.0kPa). As an option it is possible to have a 9 cm thick Bultex mattress, density 38 kg/m3 (see references SUPPLEMENT FOR BULTEX MATTRESS 10600216 and 10600211). Back in polyether foam (28kg/m³ - 3.0kPa). Lumbar cushions are supplied as follows: 2 x W60 for small bed-settee without arms, and 2 x W78 for large bed-settee without arms; 1 x W78 for small bed-settee with arms, and 2 x W60 for large bed-settee with arms. Please take these details into consideration when ordering additional/subsequent lumbars. The armrests (polyether foam 28 kg/m³ - 3.0 kPa + polyester quilting 200 g/m²) or bedside tables (MDF top diameter 43 cm - thickness 2 cm) pivot to allow the bed-settee to open.
MULTY is easy to operate, and offers excellent comfort both as a bed (with polyether mattress size : 153x194x8, 119x194x8) and as a settee. When unfolded, its depth is 200 cm for the bed-settee W 155. Mattress has an ecru-coloured cover in 50% polyester/50% cotton (dry cleanable), which has been treated with ''HealthGuard'' (antibacterial & fungicidal). A foam sheet is supplied to place between the slats and the seat when folded. For instructions on use, please see the card which comes with the bed. MULTY has been specially designed for use as a bed on an everyday basis. Optional extras: lumbar cushions and arms. Covers of lumbar cushions and armrests are removable.

MULTY
TOP SURFACE LACQUERED WHITE FOR BED SIDE TABLE
DIMENSIONS
  • x E 20 mm x Ø 430 mm
Weight
  • Including packaging
    4 kg

Download product information sheet

Technical Specifications

Frame in multi-ply and panels of particleboard, with steel mechanism and birch slats. Seat in polyether foam (28kg/m³ - 3.0kPa). As an option it is possible to have a 9 cm thick Bultex mattress, density 38 kg/m3 (see references SUPPLEMENT FOR BULTEX MATTRESS 10600216 and 10600211). Back in polyether foam (28kg/m³ - 3.0kPa). Lumbar cushions are supplied as follows: 2 x W60 for small bed-settee without arms, and 2 x W78 for large bed-settee without arms; 1 x W78 for small bed-settee with arms, and 2 x W60 for large bed-settee with arms. Please take these details into consideration when ordering additional/subsequent lumbars. The armrests (polyether foam 28 kg/m³ - 3.0 kPa + polyester quilting 200 g/m²) or bedside tables (MDF top diameter 43 cm - thickness 2 cm) pivot to allow the bed-settee to open.
MULTY is easy to operate, and offers excellent comfort both as a bed (with polyether mattress size : 153x194x8, 119x194x8) and as a settee. When unfolded, its depth is 200 cm for the bed-settee W 155. Mattress has an ecru-coloured cover in 50% polyester/50% cotton (dry cleanable), which has been treated with ''HealthGuard'' (antibacterial & fungicidal). A foam sheet is supplied to place between the slats and the seat when folded. For instructions on use, please see the card which comes with the bed. MULTY has been specially designed for use as a bed on an everyday basis. Optional extras: lumbar cushions and arms. Covers of lumbar cushions and armrests are removable.

MULTY
ARGILE LACQUERED TOP FOR BED SIDE TABLE
DIMENSIONS
  • x E 20 mm x Ø 430 mm
Weight
  • Including packaging
    4 kg

Download product information sheet

Technical Specifications

Frame in multi-ply and panels of particleboard, with steel mechanism and birch slats. Seat in polyether foam (28kg/m³ - 3.0kPa). As an option it is possible to have a 9 cm thick Bultex mattress, density 38 kg/m3 (see references SUPPLEMENT FOR BULTEX MATTRESS 10600216 and 10600211). Back in polyether foam (28kg/m³ - 3.0kPa). Lumbar cushions are supplied as follows: 2 x W60 for small bed-settee without arms, and 2 x W78 for large bed-settee without arms; 1 x W78 for small bed-settee with arms, and 2 x W60 for large bed-settee with arms. Please take these details into consideration when ordering additional/subsequent lumbars. The armrests (polyether foam 28 kg/m³ - 3.0 kPa + polyester quilting 200 g/m²) or bedside tables (MDF top diameter 43 cm - thickness 2 cm) pivot to allow the bed-settee to open.
MULTY is easy to operate, and offers excellent comfort both as a bed (with polyether mattress size : 153x194x8, 119x194x8) and as a settee. When unfolded, its depth is 200 cm for the bed-settee W 155. Mattress has an ecru-coloured cover in 50% polyester/50% cotton (dry cleanable), which has been treated with ''HealthGuard'' (antibacterial & fungicidal). A foam sheet is supplied to place between the slats and the seat when folded. For instructions on use, please see the card which comes with the bed. MULTY has been specially designed for use as a bed on an everyday basis. Optional extras: lumbar cushions and arms. Covers of lumbar cushions and armrests are removable.

Subscription to the newsletter

Login to access project details

Technical details

Large format images

Product lists

DWG drawings

Sign-up


Fields with a * are mendatory